PDA

View Full Version : Pitman or idler arms to replace



16v100bhp
04-03-2013, 02:07 PM
Already searched :D. 9 out of 10 threads talk about replacing pitman arm. But I do not see a bushing in the pitman arm.

452015

There is steering wheel play and I wanted to try out replacing the pitman/idler arms. The Tierods - left right and center were installed new but its not helping.

Should I just go with the idler arm?

7thDimension
04-03-2013, 02:11 PM
Already searched :D. 9 out of 10 threads talk about replacing pitman arm. But I do not see a bushing in the pitman arm.

452015

There is steering wheel play and I wanted to try out replacing the pitman/idler arms. The Tierods - left right and center were installed new but its not helping.

Should I just go with the idler arm?

I have the same problem, curious to see if it fixes it for you. Everything I've read points to the idler arm...

bmwbob89
04-03-2013, 03:27 PM
Make sure the bolt is tight that holds the pitman arm to the steering box. I've seen them work there way loose and cause play. Idler arm bushing does wear out and probably needs replaced.

DukeEllington
04-03-2013, 05:29 PM
Doing all the above plus control arms this weekend. Hours of fun :)