View Full Version : 318is brakes
Ben318is
03-26-2013, 04:52 AM
How easy is it to change the discs? Rears need doing on mine found some brembo rear discs and pads for a good price so looking to do it myself just wondered if its relatively simple?
Grass Hopper
03-26-2013, 08:18 AM
Extremely simple. 2 bolts to take off the caliper, then 1 allen bolt to remove the rotor. You're gonna need WD40 on the bolts
AEBI73
03-26-2013, 09:06 AM
7mm allen key
dano670
03-26-2013, 12:14 PM
Be prepared to give the rotor a few strong hits with a hammer. Mine had been on for a while and would not come off until I had used a hammer.
jeffkniseley
03-26-2013, 12:35 PM
Should take a whole 40 mins with cleaning
Sent from my iPhone using BF.c
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.