2000 540i (6spd Manual) - LCM, IKE, and EWS Factory .bin Files Needed Please

[nate325]

I need the factory .bin (PA Soft) or NCS dumps for the LCM, IKE (High Cluster), and EWS. Has to be from a 2000 540i Manual, 06/1999 manufacture date to be exact (US Spec, if they are different from other...).

If you have an identical car and the software to do it, I would really appreciate it. Thanks. I already have a load of .bin files from other cars but missing the ones I really need.

[BMWPlanetDude]

I need the factory .bin (PA Soft) or NCS dumps for the LCM, IKE (High Cluster), and EWS. Has to be from a 2000 540i Manual, 06/1999 manufacture date to be exact.

If you have an identical car and the software to do it, I would really appreciate it. Thanks. I already have a load of .bin files from other cars but missing the ones I really need.

PA Soft can not reliably program modules, it only does partial programing.
You can restore your factory options in modules by using the SG_Codieren function in ExpertMode with NCSExpert. Then take the dumps from here.

What are you trying to do exactly?

[nate325]

PA Soft can not reliably program modules, it only does partial programing.
You can restore your factory options in modules by using the SG_Codieren function in ExpertMode with NCSExpert. Then take the dumps from here.

What are you trying to do exactly?

They've already been overwritten incorrectly, I want the original dumps for all the modules.

As far as I see, PA soft will read and write the entire .bin just fine. Coding parameters are what are limited. NCS covers everything but unless you know the text (engine coding, etc) it's trial and error.

Regardless I still need the full dump from a 2000 540i Manual for the cluster at least. It was replaced and I have NO base settings to retrieve.

[nate325]

Bump. Need these please. I'll paypal someone if I have to!