1991 535I How do we remove BMW hood badge??

[BeamMeUpScottie]

Anyone ever remove their hood badge without damaging the badge or the hood trying to pry it off?

Mine needs to be replaced, but I am concerned about damaging the hood.

Thank-you

Regards

[TouringGuy]

Get a piece of hard plastic (credit card) and use that to protect the hood while you stick a blade screwdriver under the badge to pry it out. Apply gentle pressure to both sides to remove it evenly.

[upallnight]

Use a plastic pry tool with a credit card or some other hard surface material.

[lktree]

princess auto:
http://www.princessauto.com/pal/product/8424624/Trim-Tools/6-pc-Non-Marring-Pry-%26-Trim-Tools

[e34Croak]

Hammer and phillips head. Kerosene.

[ishcan]

Flame thrower.

[paperplane94]

Drill a hole, insert slide hammer.

[spyrot1]

The easiest way is to drive it into a wall, fast!!! The roundel pops right out! :shifty

Seriously, a very small flat screw driver (or a plastic one), with a shammy or very soft towel wedged between it and the car. Slowly pry it out, it should just pop out.

If you don't feel comfortable doing it that way, they do sell kits (try BavAuto).

[PorscheH6]

Allahu Akbar

[BeamMeUpScottie]

Thanks Guys, I think I will try the plastic before the flame thrower.

[south42]

bomb?


ANdy :D