Looking for help w/NCS Expert car-key coding

[Doc325i]

I need some help figuring out why i don't have the option for car-Key memory
http://i895.photobucket.com/albums/ac155/Lendoe/IMAG0501.jpg

[rondo]

Hi you need to have a profile that has the correct boxes selected .Both the Revtor and Fister profiles will give you the CKM access.or i can attach one if you need ..just delete the .TXT and install in your ncsexpert pfl file and you should see it as a profile too select when you start ncsexpert.

[Doc325i]

Thank you rondo, i would like for you to attach it.

[big mike 84]

Okay i see my pfl files... So do i just drag this attachment into my pfl folder ?

456294

[rondo]

hi yes you move the file [without the .txt] into your pfl folder

[big mike 84]

hi yes you move the file [without the .txt] into your pfl folder

Okay so move into the pfl folder then delete the .txt off the file name turning it into a .pfl file like the others Correct ?

[rondo]

here is another good profile to have
cheers

[big mike 84]

here is another good profile to have
cheers

THANKS and this is for CKM also?

[rondo]

no this is for psw\fsw .manipulation

[IcemanBHE]

Hint: Which you will need to make the change your seeking. :)

[big mike 84]

DO i have to hook the car up to a power supply to do this coding or with the car on and running is good

- - - Updated - - -


Hi you need to have a profile that has the correct boxes selected .Both the Revtor and Fister profiles will give you the CKM access.or i can attach one if you need ..just delete the .TXT and install in your ncsexpert pfl file and you should see it as a profile too select when you start ncsexpert.

okay I'm not sure what I'm doing wrong but looking at my picture there is no .txt to delete on your files b4 or after i move them in my PFL folder....

456467

- - - Updated - - -

BTW SORRY FOR ME IGNORANCE :help

[rondo]

Hi you need to google windows hidden file extensions and adjust settings in you system

[big mike 84]

Hi you need to google windows hidden file extensions and adjust settings in you system

okay i got it so where do i go from here

456554

- - - Updated - - -

I found these steps on how to "shown below" On step #3 do i Select RONDO CKM ?

1.start by creating a blank "FSW_PSW.MAN" in the WORK folder.
2. Open NCS Expert.
3. Select the fisters profile
4. Click on VIN/ZCS/FA, select your chasis, and then select the appropriate ECU (I think EWS in the E39s case)
5. Click back
6. Click on "process ECU" and select the GM3.
7. Click the button to read the ECU data.
8. Go back to the work folder, and there should be an FSW_PSW.TRC file that has data only from the GM3. In there will be a line that says "KOMFORTSCHLIESSUNG_FB". Under that it'll say "nicht_aktiv". Change that to "aktiv"
9. Click file>save as> and then where it says file type, change it to "all"
10. Save the file as "FSW_PSW.MAN" and say yes when it asks you to overwrite.
11. Now back in NCS Expert, change the job type to "SG_CODIEREN"
12. Hit execute job.

[christophebmw52]

Hello,
I can only download the tekst file??
regards, Christophebmw52