How easy is it to install an Ebay HID kit ?

[zanbeak]

there are HID kits on ebay for like 26-30$ that come with 2 bulbs, 2 ballasts and 2 wires. the 2 wires coming out of the ballast that have exposed tips, where do i connect them? how easy is it to install these kits? is there anything hard about it? also has anyone here tried green Hids? is there any difference between blue and green in quality? my e38 is green so i prefer green hids, thanks

[E38740iMD]

There are very easy to install and takes about 30 mins to do both sides. Thrre shiuld be write ups on e38.org

A dark green will be more show than performance lighting.
Same with a dark blue.

Get 4300 to 6000k for best light output

[RazvanID]

Buy 2 HID canceller capacitor to cancel the message from cluster "check low beam"
Good luck

[RazvanID]

Only a hole to pass the wires

[zanbeak]

i saw a guide on e38org but it didnt clearly state where do i connect the wires. ok so i plug the light bulb into the socket then i plug the cables of the bulb to the ballast, but where do i connect the cables from the ballast to? does anyone have a clear guide with pics of each step? thanks

[740il97g]

It's really easy but order it from sonictuning.com.