ABS Bypass+Hydro Ebrake?

[CC325i]

I want to remove the ABS under the Hood and Install a Hydro Ebrake
I searched on BF and cant find a proper DIY guide


There 1 Line that runs from the ABS to the rear and 1 line for each front left and right, 3 Lines and one pressure line from the master cylinder to the ABS.

To bypass the ABS Can i use a 4 way fitting?

And if i want to install A Hydro ebrake How would I do this? Im guessing the pressure line would run directly to the rear?

[CC325i]

anyone?

[CMG]

Bad idea in the first place but if u do it the hydro ebrake is totally seperate from your car brakes.

[CC325i]

This is for a fully stripped drift car, Does the ABS have some sort of metering valve in it or can a 4 way fitting be used to bypass the ABS

[sjpgoalie]

...Just pull the relay.

[CC325i]

No I want the ABS unit out of the car

[CC325i]

bump