For Sale - Mtech II rear air dam (with cover!) and Mille Miglia MM11 wheels

[xing6666]

Cleaning out the garage this weekend and I've finally decided I'm going to stick with my Zender rear air dam as opposed to the Mtech II. As such, it goes up for sale. Before I haul it off to the vultures on Ebay, I figured I'd throw it up here first. Condition is overall very good with no gauges in the plastic. The paint is probably about a 6.5/10 repaint. It's okay and relatively shiny, but it's got little scratches here and there from storage - all cosmetic. As pictured, it still retains the often lost tow hook cover.

SOLD

http://farm9.staticflickr.com/8020/7672043108_de1b152096.jpg

Also on the block is a set of Mille Miglia MM11 wheels (NOT MM11 2's). These were the same type I had on the bronzit 6 that many of you may recall was the subject of all the turbo debacles. :rolleyes They are unique 17x8 5-spoke's and they look wonderful on the e24.

For the longest time I was looking for a set to put back on my M635. I finally found a set and purchased them to use as spares, but after all that just decided to suck it up and have my factory 16" BBS RS ones refinished. They are in overall good condition - no real curb rash to speak of, but some little nicks and scratches here and there from storage. There are NO TIRES on these wheels.

These wheels were discontinued circa 2006 and are hard to find (much more so than the later gunmetal MM11 2's). I would really prefer local pickup on as they're hard to ship, but if you really want to pay for shipping, I can box em up and ship em out at your cost. $350 for the set.

More detailed photos of the wheels can be found here:
http://www.flickr.com/photos/68808534@N02/sets/72157630831171328/

http://farm9.staticflickr.com/8164/7681284796_c21db5f927.jpg

I even found a photo of my Bronzit 635CSi from a million years ago with these wheels on it... :)
http://farm8.staticflickr.com/7128/7684719938_2243d3056d.jpg

[jeanro]

Hi there,
Is your air dam going to fit an M6 ( U.S.A version ) ? It looks like your car is a M635. If is working on mine, I'm ready to buy it.
Cheers,
Jean

[xing6666]

I'm sorry, I should have mentioned this is Euro only!

[wabrowne]

Hey Kai-
Sell me your your sun-roof panel headliner!
Billy
84Euro635/84M635 (still need gray cloth headliner & s/roof panel)

[JohnLM6]

Kai, I would like your rear MTech for a project with my euro bumper. I am in Memphis and can do Greyhound. PM me and let's deal

[bimas]

I'd like to see some pix of your wheels to consider them. What is the offset and bore?

[xing6666]

I'd like to see some pix of your wheels to consider them. What is the offset and bore?

I will get the specifics ASAP - got tied up last night and couldn't take the photos I wanted to.


Hey Kai-
Sell me your your sun-roof panel headliner!
Billy
84Euro635/84M635 (still need gray cloth headliner & s/roof panel)

Still!!!? Lol - mine is in terrible shape u sure MINE is the one you wanna hold out for?

[EvilStar]

interested in those wheels. what is the ET?

[FernandoBunster]

For any of you considering converting your us-car to euro bumpers, this M-Tech rear apron is ideal for a no hassel, no welding set-up. It eliminates the need to attach (weld) the euro lower apron when installing the wrap around euro rear bumper. Needless to say that valance is impossible to find unless you cut it off a donor car as I had to do.

In addition that is an outrageous price.

[xing6666]

In addition that is an outrageous price.

Outrageously good or outrageously bad? lol

[FernandoBunster]

Outrageously good! Terrific, the bees knees, I'm tempted to buy it even though I've already done my euro conversion good! LOL

[AlpineE24]

Hey Xing666 Do you still have the M-Tech II rear bumper?

If so, I would be willing to buy it.... I am located in Napa Ca 94559. How were you wanting payment for it?

let me know

Greg

[wabrowne]

Still!!!? Lol - mine is in terrible shape u sure MINE is the one you wanna hold out for?[/QUOTE]

I'm holding out for anybody's sun-roof panel or headliner & s/roof panel!

I've been talking to a factory in China but the smallest run is like 10,000 meters....maybe that would be enough to do a wrap?

thanks,
Billy

[xing6666]

Mtech valence sold. Thanks John! More info on wheels shortly!

Alright, sorry for the late wheel information folks. After closer inspection, as I said, there are a few nicks and scratches here and there, but nothing particularly substantial. A bunch of the stuff could probably polish out. There is one small bit of curb rash about an inch long (pictured).

Another correction: the wheels are 17x8.5, not 17x8. They should fit the e24 no problem - I had the same set on my 86 635CSi. They are ET15 and they have the hubcentric rings you will need for your e24 (in fact, it was missing one when I got them and I picked up a new one from tirerack).

First come first serve! :)

Pictures of all the wheels at the link below:
http://www.flickr.com/photos/68808534@N02/sets/72157630831171328/

[bimas]

Thank you for posting the pix. I am still pondering if I want to recover my seats more at this moment (if I was local, the wheel purchase would be a no-brainer).

[xing6666]

Thank you for posting the pix. I am still pondering if I want to recover my seats more at this moment (if I was local, the wheel purchase would be a no-brainer).

Okay, no problemo. I got about 5 PM's tonight from all over the place, so I'm hoping they'll be gone by tomorrow.

[Stupid Kid]

Nice price on those wheels, they look like concave borbet H's... if I was local and had the money and didn't already have way to many sets of wheels... ah, good luck selling them :)

[xing6666]

Nice price on those wheels, they look like concave borbet H's... if I was local and had the money and didn't already have way to many sets of wheels... ah, good luck selling them :)

Yea, they're nice a deep dish... I loved the look when I had them on my e24 way back when - that's why I went out looking for another set. Can't beat the stock M6 BBS 3-piece wheels though - those are original and classic. Thanks! :)

[xing6666]

With many thanks to the dozen or so folks who responded to my listing, the wheels are officially sold. I'm thinking I priced them too low, given the interest... lol. :buttrock

Cheers everyone - my garage looks much cleaner now!