Front camber for the track? (540i/6)

[marlinspike]

I've gotten as much benefit as I can out of the toe settings, and while the handling is a lot better than factory spec, there's no way around the fact that these cars need more negative camber up front. Anybody already gone through this and can offer a starting point? I'm thinking I'll need to add 1.5 degrees of negative camber.

[topaz540i]

im not getting one but i was looking at Kmac setups on Turnermotorsport.com
Kmac has a few different versions with varying degrees of adjustment.

http://www.turnermotorsport.com/BMW-E39/c-64-bmw-kmac-turner-camber-caster-plates.aspx

[marlinspike]

Well, the KMAC ones are adjustable and my understanding is they can add up to 3 degrees if you set them that way. I'm just hoping for someone who can shortcut the guess and check process for me a bit.

[alrivers]

Guess it depends on which track your driving at. I'm running between -2.3 to -2.8 depending on the track. I've tried maxing out to -3.0; however, I'm limited to a max of -2.8 since the plates hit the insides of the towers.