PDA

View Full Version : just replaced my battery got one question



smi2710
06-02-2012, 06:48 PM
my 06' 325xi battery has been going for sometime so i replaced it today with a maxx everstart 94r. Removal and install was easy maybe 15 min but i have one plug (red and blue wire) that i did not unplugg nor can i find where it goes:(

its comes from the power cable that runs around the battery on the inside and this wire is about 6 inches long with small black plug any clues guys ill snap a photo in a second

oh and i know there is alot of discussion whether to reset the car to the new battery or not. I am choosing not to do this right now maybe ill get the BT software but im not really worried about the battery



heres a photo of plug
http://i1239.photobucket.com/albums/ff504/fucked4sure/photo1.jpg

02325
06-02-2012, 09:48 PM
dont worry about it.

that is the connector for the battery disconnect switch that the techs take out during the pdi.

automaxxsd
06-04-2012, 01:22 AM
That dosnt fit into anything dont worry about it. Leave it the way it is.

White94RX
06-04-2012, 09:29 AM
You really do need to have it registered. That battery won't last nearly as long if it's not registered.

smi2710
06-04-2012, 01:41 PM
dont worry about it.

that is the connector for the battery disconnect switch that the techs take out during the pdi.


thanks for the info :thumbup: