Rear Toe-in alignment

[Tnarkowicz]

Had a wheel aligment done recently. Was told that the rear-left wheel had toe-in alignment out of spec around 1.5 deg from memory.

What could cause this? Worn components? Bushings?

I did have a nasty rear-end collision a few years back with significant repairs, hope this did not cause this problem (had rear quarter panel creasing as as far forward as centre of wheel arches).

I'm hoping this is something I can fix rather than a permanent problem.


Tony
'86 635

[Taylor Marshall]

Bad trailing arm bushings or maybe the accident actually bent the left trailing arm.