View Full Version : reprogramming key fob 1 button
boeing747
05-09-2012, 03:51 PM
Hi I have bought a (key fob) on ebay as I can program it? I have only the module, some electronic know interpret these photos? thanks
my key fob
http://img14.imageshack.us/img14/3379/cimg0871q.jpg
my module receipt
http://img204.imageshack.us/img204/5047/cimg0883t.jpg
E36ic4Me
05-09-2012, 03:58 PM
All it takes is a two second Google Search.
http://forum.bmw5.co.uk/topic/22192-bmw-single-button-remote-programming-e32e34e36-etc/
boeing747
05-09-2012, 05:22 PM
All it takes is a two second Google Search.
http://forum.bmw5.co.uk/topic/22192-bmw-single-button-remote-programming-e32e34e36-etc/
This post is to make duplicate
key fob, I have no key fob to copy, my question is
how I can program another key fob without having the original fob key? can be interpreted the plate of the module? thanks
gc325is
05-11-2012, 10:38 PM
One looks like made in 1988 and the other is 1991. You need to compare the FCC IDs to see if they were compatible. Then show pic of the both sides of the board cause therelooks to be no decode chip.
boeing747
05-11-2012, 11:57 PM
If the command must be 88 and module 91, the reference of my module is 82 11 9 401 487, I bought a module and key fob version Great Britain ref 82 92 9 404 791 can serve me the receiving box small putting in my module do Spanish?maybe?? thanks l
http://img268.imageshack.us/img268/5044/cimg0886w.jpg
http://img526.imageshack.us/img526/2526/mando001.jpg
gc325is
05-13-2012, 03:06 AM
Sorry we have another design in the US. I did find some programming modes for the unit you have. Not sure if the remote matches it? We use FCC ID to match remotes.
http://www.bimmerportal.nl/post341192.html
http://www.318ti.org/forum/showthread.php?t=13607
boeing747
05-13-2012, 02:10 PM
one question, if I put a small box of another alarm with a different reference in my module, but of which I have the command, will work me?Thank you
boeing747
05-18-2012, 04:49 PM
Hello, I found another module, I put it and works, the key fob has a very short range, can you put an antenna cable longer??improve the reception, thank you
gc325is
05-20-2012, 12:36 AM
Short range is usually a weak / old battery. I see a black wire in one of your picture. That SB the antenna and a longer one will help or just make sure it is not folded when installed.
boeing747
05-20-2012, 07:38 PM
Hello, I changed the battery and it works much better,works to 10 meters and as much 15 meters if there is no interference.There are somehow of increase that distance? thanks
boeing747
05-23-2012, 11:39 AM
now it is much better, sometimes it works to 40 m and others 15 m
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.