PDA

View Full Version : 92 525i no washer spray



prop
05-08-2012, 10:41 AM
only has 130,000 .i checked supply line at the spray head and get good pressure but nothing comes out of the spray head.i check the washer pressure fuse and it good.can those head be replaced with some kind of manual spray head?

SeanNHouston
05-08-2012, 11:37 AM
lol I just use a water bottle

Sparke34
05-08-2012, 11:44 AM
Nozzle is clogged, soak it in vinegar or get some denture soak...or get new ones, they're cheap.

BMRCommuter
05-08-2012, 12:21 PM
Mine were plugged too, I took them apart to clean and a seal inside had deteriorated and plugged the whole thing up. They also broke I took them apart. So I siliconed them to seal them up when I put back together and they work great.
But if I knew that going in I would have just bought replacements.

prop
05-09-2012, 10:00 AM
yea i tried to clean them and got one apart and cleaned out but the other one i had to silicone back together but it didn`t hold .so off to the dealer for replacement

cheap?i just got back from the dealer wanted 82 f---ing dollars for one.no thanks i`ll figure something else out.mi530i can you tell me where i can get them cheap?

Sparke34
05-09-2012, 02:27 PM
http://www.pelicanparts.com/cgi-bin/ksearch/pel_search.cgi?please_wait=N&forumid=&threadid=&command=DWsearch&description=washer+spray+nozzle&FILTER_BE34=ON&FILTER_TECH=ON&FILTER_SUPP=ON&FILTER_ACCE=ON&FILTER_CARE=ON&FILTER_STUF=ON&FILTER_PERF=ON&FILTER_MISC=ON&FILTER_GADG=ON&FILTER_TOOL=ON

Here's one place...I'm sure there are others. The site I got mine from is down right now.

prop
05-10-2012, 08:36 AM
yea i found one.about $18 delivered should be here today.it has 2 inlets so you have to cap one off.