bads33d
04-12-2012, 05:47 PM
After a lot of thought/work, decided not to run these... :/
original Centerlines | 15x8.5 -32 | 5x120, 72.56 cb, (two-piece riveted)
Continental EcoPro 175/55s
Got em from a guy when I lived in Vegas that had em sitting on his 70 Camaro parts car, with massive drag tires. He never ran em. Lips and everything are perfect. No scratches/dents, but need to be scotch-brited.
They were originally GM's 5x120.65 which would work on BMWs, BUT Centerlines require lugs studs and a shank lug nut, and the minute difference wouldn't allow them to bolt up. I had the holes machined out in order to fix this. Also, the centerbore is the correct 72.56. The machine shop press-fit hub rings in them so they fit perfect.
Tires are 175/55 Continental EcoPros, with maaaybe 500 miles on them. And that's being generous, probably way less. Left rear is shaved a decent bit from rubbing, right slightly.
I really love the look, and will probably regret getting rid of them but Alex beat me to the punch with the small wheel e28 steez... :P
http://farm8.staticflickr.com/7268/6925733690_8b349d25d4_o.jpg
these aren't scratches, just scuffs
http://farm8.staticflickr.com/7042/7071804323_7b4e486857_o.jpg
http://farm6.staticflickr.com/5461/6925725344_13714e5c0d_o.jpg
http://farm8.staticflickr.com/7182/7071803559_c8be055b50_o.jpg
http://farm6.staticflickr.com/5345/6925729302_04031a064f_o.jpg
http://farm8.staticflickr.com/7213/7071807011_2c545e519c_o.jpg
http://farm8.staticflickr.com/7188/6925726484_3689be7b36_o.jpg
*they get the car very low. lol
Asking $1,000 obo
email: codyleebrady@gmail.com / text: 702.three,three,five.4496
Thanks,
Cody & Shirl<3
original Centerlines | 15x8.5 -32 | 5x120, 72.56 cb, (two-piece riveted)
Continental EcoPro 175/55s
Got em from a guy when I lived in Vegas that had em sitting on his 70 Camaro parts car, with massive drag tires. He never ran em. Lips and everything are perfect. No scratches/dents, but need to be scotch-brited.
They were originally GM's 5x120.65 which would work on BMWs, BUT Centerlines require lugs studs and a shank lug nut, and the minute difference wouldn't allow them to bolt up. I had the holes machined out in order to fix this. Also, the centerbore is the correct 72.56. The machine shop press-fit hub rings in them so they fit perfect.
Tires are 175/55 Continental EcoPros, with maaaybe 500 miles on them. And that's being generous, probably way less. Left rear is shaved a decent bit from rubbing, right slightly.
I really love the look, and will probably regret getting rid of them but Alex beat me to the punch with the small wheel e28 steez... :P
http://farm8.staticflickr.com/7268/6925733690_8b349d25d4_o.jpg
these aren't scratches, just scuffs
http://farm8.staticflickr.com/7042/7071804323_7b4e486857_o.jpg
http://farm6.staticflickr.com/5461/6925725344_13714e5c0d_o.jpg
http://farm8.staticflickr.com/7182/7071803559_c8be055b50_o.jpg
http://farm6.staticflickr.com/5345/6925729302_04031a064f_o.jpg
http://farm8.staticflickr.com/7213/7071807011_2c545e519c_o.jpg
http://farm8.staticflickr.com/7188/6925726484_3689be7b36_o.jpg
*they get the car very low. lol
Asking $1,000 obo
email: codyleebrady@gmail.com / text: 702.three,three,five.4496
Thanks,
Cody & Shirl<3