633inga
04-09-2012, 12:03 AM
Hi all - still trying to get my 633 project to run..I have battery voltage everywhere I need it but just not any pulse. The position sensor ohms out ok but when I test for voltage it goes from 2.6 to 4.7 as the motor spins. One pass of the target past the sensor the meter reads 2.6 the next time the target passes its 4.7 and it alternates like that continuous. Curious if that means the position sensor is bad or if that's normal. I'm really hoping that my problem is not in the ECU but I'm running out of options.