YoPaulyzSIck
04-07-2012, 07:21 PM
I installed new water pump , new radiator, new thermostat cleaned my engine bay changed oil housing gasket and O-ring and cleaned all the pulleys rebuild alternator.. Everything was done nice and neat and beautiful.. After all replacements were done .. Changed the oil.
I mixed blue BMW antifreeze with water just like instruction said and pored it into expansion tank. Put heat on all the way and let all the air out and the heat was coming out nice and a hot I made sure there was no air left in a system, and expansion tank was full to the limit.. I closed the cap down everything was fine .. Then all over a sudden it started raising up and coming out through the cap and poring out!! So my next theory was that the cap was bad . I went out and bought a new one .. Same situation happened . After 30 min or so it started doing the same thing! While the electrical fan was on! And it still was poring out .. Then I removed the thermostat and installed the housing to see if there is circulation.. And it started to over heat after 30 min or so. So I figured the circulation is messed up and it's water pump, when I removed the water pump it was fine!!!! WTF is going on????? .. I'm very irritated and stressed out. I spend a lot of time trying to figure out the problem ... Please any idea????? I forgot to mention its 318is M44
Bump!!!!!!!!
I mixed blue BMW antifreeze with water just like instruction said and pored it into expansion tank. Put heat on all the way and let all the air out and the heat was coming out nice and a hot I made sure there was no air left in a system, and expansion tank was full to the limit.. I closed the cap down everything was fine .. Then all over a sudden it started raising up and coming out through the cap and poring out!! So my next theory was that the cap was bad . I went out and bought a new one .. Same situation happened . After 30 min or so it started doing the same thing! While the electrical fan was on! And it still was poring out .. Then I removed the thermostat and installed the housing to see if there is circulation.. And it started to over heat after 30 min or so. So I figured the circulation is messed up and it's water pump, when I removed the water pump it was fine!!!! WTF is going on????? .. I'm very irritated and stressed out. I spend a lot of time trying to figure out the problem ... Please any idea????? I forgot to mention its 318is M44
Bump!!!!!!!!