Hiii

[datmetzkid]

Hiiii I got a couple questions!?

The first question I have it I when I turn on my car the led plate lights flash when the cars on wih out the lights !? Dose anyone have any suggestion on what would cause that do happen!?

The second question is I have been having a problem with my windshield wipers the relays was not connected so I went out to a junk yard and cut the relays out another e38 connected everything back and they still didn't work I'm so confused on what to do next !? Can anyone help thanks

[i495 bandit]

Please rephrase your first question or take a pic cause I don't understand what you're talking about. About the wipers...have you the checked the fuses that correspond with the wipers?

[datmetzkid]

Please rephrase your first question or take a pic cause I don't understand what you're talking about. About the wipers...have you the checked the fuses that correspond with the wipers?

When my car is started but the lights are not on the LEDs for the plate lights flash and it'd be hard to take a pic and for the wipers I changed the relays but I don't know where the fuse is for the wipers

http://www.youtube.com/watch?v=VKc_aabTzzY at the ending of the video you can see it more

[pfregeolle]

What bulbs are in there? It looks like it is trying to do the bulb check but it wont work if you have the wrong type of bulbs in and it will cause some odd issues.

Sent from my iPhone using BF.com

[i495 bandit]

Ok I got it, Thanks for the video. Sometimes those led license plate lights can cause voltage issues. If they dont have a built-in resistor they can cause a problem. Try putting the stock lights in and see if they work. If they do then you know it's the led bulbs.

Look at the fuse box panel and see if you can locate the wiper fuse. I think there's fuse map in the manual that you can find on www.e38.org if the fuse is good and the relay is good then it's probably a bad wiper motor.

[datmetzkid]

Ok I got it, Thanks for the video. Sometimes those led license plate lights can cause voltage issues. If they dont have a built-in resistor they can cause a problem. Try putting the stock lights in and see if they work. If they do then you know it's the led bulbs.

Look at the fuse box panel and see if you can locate the wiper fuse. I think there's fuse map in the manual that you can find on www.e38.org if the fuse is good and the relay is good then it's probably a bad wiper motor.

Thanks il let you kno of I can find the problem with the wipers thanks alot

[psjr]

Yep, put some resistors in with the bulbs or get different ones.
The flashing is caused by the LCM checking the resistance of the lights.