Made in OC
02-23-2012, 03:29 AM
Product info:
A feature of the E46 strut tower is the incorporation of their "crash slots". These slots have been incorporated into the front strut towers to allow for the left and right alignment specs to be even, in the case of uneven left/right specifications. (accidents, suspension component wear, bushing wear). Assuming "perfect" left/right alignment, removal of the strut mount "pin", and moving the strut mounts completely inwards, you can gain an additional 0.5º of camber (further improving handling). Theoretically, this allows for the front camber to be -1.8º (mounts puts completely inwards) to -1.2º (mounts pulled to the outsides).
Rogue Engineering Fixed Camber Plate Features
* Lightweight, strong 6061-T6 aluminum construction, black anodized (The local dealer would probably never notice!)
* Grade 8.8 hardware.
* Low profile design has minimal effect on overall ride height.
* Since factory strut mounts are still used, there is NO affect on NVH.
* Legal for all BMW CCA race classes as well as many SCCA classes.
* Compatible with most strut tower braces.
* Application is for 99-06 323,325, 328, 330
Camber plates were used for under 5k miles before swapping to new coils with adjustable camber plates.
I am asking $120 picked up in Anaheim, CA or $130 shipped including Paypal.
For all inquires, please email me directly at tran.c.charles at gmail dot com for quickest response.
http://www.rebmw.com/Merchant2/graphics/00000001/suspension/camberplate/camplt_600.jpg
A feature of the E46 strut tower is the incorporation of their "crash slots". These slots have been incorporated into the front strut towers to allow for the left and right alignment specs to be even, in the case of uneven left/right specifications. (accidents, suspension component wear, bushing wear). Assuming "perfect" left/right alignment, removal of the strut mount "pin", and moving the strut mounts completely inwards, you can gain an additional 0.5º of camber (further improving handling). Theoretically, this allows for the front camber to be -1.8º (mounts puts completely inwards) to -1.2º (mounts pulled to the outsides).
Rogue Engineering Fixed Camber Plate Features
* Lightweight, strong 6061-T6 aluminum construction, black anodized (The local dealer would probably never notice!)
* Grade 8.8 hardware.
* Low profile design has minimal effect on overall ride height.
* Since factory strut mounts are still used, there is NO affect on NVH.
* Legal for all BMW CCA race classes as well as many SCCA classes.
* Compatible with most strut tower braces.
* Application is for 99-06 323,325, 328, 330
Camber plates were used for under 5k miles before swapping to new coils with adjustable camber plates.
I am asking $120 picked up in Anaheim, CA or $130 shipped including Paypal.
For all inquires, please email me directly at tran.c.charles at gmail dot com for quickest response.
http://www.rebmw.com/Merchant2/graphics/00000001/suspension/camberplate/camplt_600.jpg