FSUhorizon
02-14-2012, 11:43 PM
I currently have three sets of mesh splits. I'd like to trade ONE set for a five spoke design wheel. Here is what I want:
1. 17 inch, low offset AC Schnitzer Type 1 race. Rear mount ONLY.
2. 16 inch OZ Futura in 4x100 or redrillable to 4x100. 17-18 inch OZ Futura in 5x120
3. 16-17 inch Hayashi/HRE 505.
What I have:
Set 1: BBS RS 5x120 Front: 17x8.5 et 17. Two inch slant lips. Rear 17x10.5 et 42. Two inch slant lips. Faces are gold. Lips are being mirror polished. Should be completed by 3/1.
Set 2. BBS RS 4x114/4x100 NO FILL AND REDRILL. Dual drilled by Rotiform. Pads are flat and shallow with convex spokes to allow brake clearance. Fronts are 16x8.5 et 14 with 2.5 inch stepped lips. Plans for the rears are 16.9.5, et 14 with 3 inch stepped lips. Faces are raw metal. NOT media blasted. My current plan is simply to plasti dip the faces so that I can change the color very easily.
Set 3. Kinesis K27 5x120. Front: 18x9 et 25ish (I would have to measure) with three inch slant lips. Rear 18x9.5 et 32ish (again, need to measure). Refinished 11/2011. Some rash that I could not fully get out without removing more metal that I wanted to on one lip. Other than that, the set is in great shape. Faces are painted white. Bolts are black. Lips are mirror polished. Both faces and lips have had sharkhide applied.
Pictures are just to conform to forum rules. Yes, they suck. I'll take detailed pictures if someone actually has what I'm looking for. Otherwise, they aren't for sale.
http://img.photobucket.com/albums/v488/fsujbp/Mobile%20Uploads/IMG_1224.jpg
http://img.photobucket.com/albums/v488/fsujbp/Mobile%20Uploads/IMG_1225.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1335.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1336.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1339.jpg
A couple of trade offers so far. Just to be clear, I'm only interested in trading for the wheels I listed. If you think you have something of equal quality, I suppose it might be worth considering so go ahead and pm me. As a general rule, it should be forged and three piece.
1. 17 inch, low offset AC Schnitzer Type 1 race. Rear mount ONLY.
2. 16 inch OZ Futura in 4x100 or redrillable to 4x100. 17-18 inch OZ Futura in 5x120
3. 16-17 inch Hayashi/HRE 505.
What I have:
Set 1: BBS RS 5x120 Front: 17x8.5 et 17. Two inch slant lips. Rear 17x10.5 et 42. Two inch slant lips. Faces are gold. Lips are being mirror polished. Should be completed by 3/1.
Set 2. BBS RS 4x114/4x100 NO FILL AND REDRILL. Dual drilled by Rotiform. Pads are flat and shallow with convex spokes to allow brake clearance. Fronts are 16x8.5 et 14 with 2.5 inch stepped lips. Plans for the rears are 16.9.5, et 14 with 3 inch stepped lips. Faces are raw metal. NOT media blasted. My current plan is simply to plasti dip the faces so that I can change the color very easily.
Set 3. Kinesis K27 5x120. Front: 18x9 et 25ish (I would have to measure) with three inch slant lips. Rear 18x9.5 et 32ish (again, need to measure). Refinished 11/2011. Some rash that I could not fully get out without removing more metal that I wanted to on one lip. Other than that, the set is in great shape. Faces are painted white. Bolts are black. Lips are mirror polished. Both faces and lips have had sharkhide applied.
Pictures are just to conform to forum rules. Yes, they suck. I'll take detailed pictures if someone actually has what I'm looking for. Otherwise, they aren't for sale.
http://img.photobucket.com/albums/v488/fsujbp/Mobile%20Uploads/IMG_1224.jpg
http://img.photobucket.com/albums/v488/fsujbp/Mobile%20Uploads/IMG_1225.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1335.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1336.jpg
http://img.photobucket.com/albums/v488/fsujbp/Car%20Pics/IMG_1339.jpg
A couple of trade offers so far. Just to be clear, I'm only interested in trading for the wheels I listed. If you think you have something of equal quality, I suppose it might be worth considering so go ahead and pm me. As a general rule, it should be forged and three piece.