Brakes from an M3?

[Pierre3400]

Hey guys,

I am considering getting stock m3 brakes on my E36. In my mind this would require M3 brakerdiscs and calipers, but when im looking for parts on a webshop, they dont seem to agree with me, or maybe they are just trying to idiot proof thier customers.

Would i be right in thinking that all i need is discs and calipers or do i need more?

[Pik Masta]

http://www.unofficialbmw.com/e36/brakes/e36_325i_to_m3_brake_conversion.html

Not to sure about a 320I but here is a good example of what you need.

[Pierre3400]

http://www.unofficialbmw.com/e36/brakes/e36_325i_to_m3_brake_conversion.html

Not to sure about a 320I but here is a good example of what you need.

320i is identical to the 325i.

Looks like i just need Discs and calipers and then i should be able to go from 286mm to 315mm since i already run 17" wheels there should not be an issue here.

[Pik Masta]

no, for the front it says you need everything from wheel bearings and out, meaning you need M3 wheel bearings, front hub assembly, spindles.

[E36B1MM3R]

Yes I just did this and what you need is:
L+R Front spindles (knuckles), calipers, rotors and pads....and you are good to go.

[orangehatter]

no, for the front it says you need everything from wheel bearings and out, meaning you need M3 wheel bearings, front hub assembly, spindles.

http://www.realoem.com/bmw/partxref.do?part=31226757024

The front wheel bearing/hub assembly is identical on the M3, 328, 325, 323, 320, and 318.

[Pik Masta]

http://www.realoem.com/bmw/partxref.do?part=31226757024

The front wheel bearing/hub assembly is identical on the M3, 328, 325, 323, 320, and 318.

Thanks for the correction, but it is always nice to replace them anyways lol