PDA

View Full Version : Couple of questions....HELP!



yoyoyo
11-17-2011, 11:30 AM
This is an E36 M

Okay first off I got a set of BC coilovers and went ahead and ordered GC RSM should I get a Z3 reinforcement plate or should I be good like this....

Second I just installed my fogs cause for some reason the previous owner took them off I installed them drove around one night then the next morning I went to cut them on and it didn't show the green dash indicator that the fogs were on could this wiring issue? Or a blown fuse?

Third my clear coat is fading on the trunk... Any suggestions? :(

Moron95M3
11-17-2011, 11:35 AM
fogs are tied to a handfull of fuses. Check there first (also check high beam fuses as they are linked - turn on highs and fogs turn off).

I had that issue and it turned out being my 'flasher' fuse (when you flash your brights).

stadrift11
11-17-2011, 12:18 PM
This is an E36 M

Okay first off I got a set of BC coilovers and went ahead and ordered GC RSM should I get a Z3 reinforcement plate or should I be good like this....


Third my clear coat is fading on the trunk... Any suggestions? :(

^ i just ordered BC coils also and was wondering the same thing... i belive the gc's come with reinforcement plates already, i know the rouge rsm's do

yoyoyo
11-17-2011, 12:27 PM
Yeah I was under Te understanding they did but I'm not to sure?