clutchnet red pp and 6 puck clutch

[bmmrr]

I have clutchnet red pp and 6 puck clutch for s50.

Can I use these parts in my e36 325i nv with oem flywheel or should I need s50 flywheel for my 325i?

thanks

[Dominic49]

you need the s50 flywheel but iirc the clutchet red plate was for an s52?

[cragg56]

Someone chime in and correct me if I am wrong, but the s50 and s52 flywheels and clutches are interchangeable. If I remember correctly the difference between the s50 and s52 flywheel is that the s52 is slightly lighter. If I also remember correctly, the stock s52 pressure plate has a slightly higher clamp load than the s50.

So long story short you should be able to use either a s50 or s52 stock flywheel or any aftermarket e36 m3 flywheel built to work with a stock clutch.


See links below
http://forums.bimmerforums.com/forum/showthread.php?t=904578

[milKt]

and the forks are the same as well? (though different part numbers?)