PDA

View Full Version : E36 M50 manifold plug


boostedwolfie
08-14-2011, 06:22 PM
Looking for the plug that goes on the back of an m50 mani that is used with t-fitting/vacuum part of an m50 mani on a m52 diy swap. Both the crank case vent and idle controller lead to this. Stuck in the middle of the swap so i need this asap!!!
marc1119
08-14-2011, 06:57 PM
Looking for the plug that goes on the back of an m50 mani that is used with t-fitting/vacuum part of an m50 mani on a m52 diy swap. Both the crank case vent and idle controller lead to this. Stuck in the middle of the swap so i need this asap!!!

I have a couple new ones in the bag...where are you located?
boostedwolfie
08-14-2011, 06:57 PM
Can i get this from the dealer still? If anyone has one i will pay more then its worth
marc1119
08-14-2011, 07:11 PM
11 61 1 738 629 part is $5.65 from the dealer

As I told you, I have a couple....or just order one from a dealer
boostedwolfie
08-15-2011, 08:45 AM
11 61 1 738 629 part is $5.65 from the dealer

As I told you, I have a couple....or just order one from a dealer

Wasnt sure if they could still order them. Ill go to the dealer this afternoon since its literaly a block away. Thanks for the help. And sorry looks like i bumped the same time you replied!