45mm offset on 95 M3?

[Balthazarr]

I just purchased a set of wheels which according to the print on the box are 45mm.
These were advertised as 18X8 ET37 and i was assured they would fit my 95.

I know that 38-45mm should fit, but I'm lowering my car 1" and want to run 245/40/18 Kumho mx or Falken or YOKO AVS sports.
Not final on that
Probably not So3's.

Will I have to roll the rr's and/or spacers?

Thanks

I'll post a pic or 2 in a few.

[96cosmosM3]

45 is perfect for the rear
38 is perfect for the front, if they are 45s all around you might need spacers in the front

[Balthazarr]

http://images.cardomain.com/member_images/6/web/294000-294999/294756_38_full.jpg

http://images.cardomain.com/member_images/6/web/294000-294999/294756_39_full.jpg

http://images.cardomain.com/member_images/6/web/294000-294999/294756_40_full.jpg

[Willy///M3]

Those look really nice.

The rears will fit fine with no rolling needed.

You *might* have a problem with the front wheels rubbing on your front struts.

My wheels have a 43mm offset and never had rubbing issues with my stock struts but I had to use a set of 5mm spacers to clear my coilovers.

good luck and post some pics once they are on, they look great.

[Balthazarr]

Thanks Willy, been a while.
How you been?

Listen, the vendor I purchased these from spoke with Ro_Ja and was told they are a 37 offset.
Needless to say I am confused being that the box has 45mm printed on it.

And I can't find the ET stamped on the rim anywhere on either of the 4.