PDA

View Full Version : E39 WTB: Complete Wiring Loom for E39 Monitor/tv/radio/nav



matt45
05-19-2011, 09:06 PM
Hi All,

I am looking for a complete loom in order to retrofit TV/NAV to my '02 E39, Car is currently spec'd with 10 speaker business radio MID.

Due to having rear folding seats i am unable to use a loom from a jap import (which most of the wrecks here are) as their radio and TV modules attach to the back of the seats and the loom will not reach to the normal location by the passenger taillight.

I need absolutely everything for the retrofit so the mounting brackets etc would also be of interest if anyone has them.

I am in New Zealand so seller would have to be willing to ship (at my cost) and use paypal.

Thanks
Matt

Farvardeen
05-21-2011, 01:33 AM
i do have this from a 02 M5. how is $225? its quite a job to take off the harness. I can ship it to NewZealand need your address

asiaava27
11-24-2011, 12:09 AM
Basically, the task of any wire loom is to properly channel your wires to their central location and keep them together neatly. Simple in principle and when done wire looms save a whole lot of time and heartache and as a result you can properly utilize any wire related setup you have whether it be a home theater, office, or rec room

wire loom (http://www.cabletiesandmore.com/wireloom.php)