Anyone with INPA know the standard CPS values?

[nah2323]

So I have a bad camshaft position sensor on bank#2, and I'm reading the digital values #6 in the DME 7.2. Bank #1 was at 7.95 or something of the like, and Bank #2 was at 2.0~.

So for those of you with INPA, what are the values you're seeing realtime for the camshaft position sensors?

Thanks!!!

[IcemanBHE]

Ill look later...

Im building another machine and will need to test it out.

[IcemanBHE]

Here is the AV values for the 01:

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/01AV1.jpg

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/01AV2.jpg

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/01AV3.jpg

And for the 99:

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/99AV1.jpg

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/99AV2.jpg

http://i795.photobucket.com/albums/yy233/IcemanBHE/Diagnostics/99AV3.jpg

[nah2323]

very nice, thanks B! I have a new cam position sensor on the way for 9am tomorrow, but in the meantime, I'm going to pull the screenshots like you did before and after for reference.. Hopefully one of you guys will see it and be like "Well yeah, that's out of spec."

[IcemanBHE]

I dont know what in/out of spec is...I just know mine dont throw codes and runs fine....

Until I get an error, I stick my head in the sand.

[Edwin NL]

Be sure to get Bosch, others will fail soon

[nah2323]

Of course. you should know me better than that Edwin..