WTB OBD I Conversion parts

[PitchblakToxic7]

Hey, just looking for the parts to convert my '98 M3 to OBD I, already have the manifold, whatever you may have PM or reply here, I'll consider any reasonable offers. Thanks for looking - Ethen

Taken from http://forums.bimmerforums.com/forum/showthread.php?t=602151

1. OBD1 harness (Bought)
2. OBD1 ECU (Bought)
3. OBD1 chip
4. OBD1 intake manifold (Have)
5. OBD1 fuel rail (Bought)
6. OBD1 crank position sensor (Have)
7. OBD1 cam position sensor (Have)
8. OBD1 ping/knock sensor x2
9. OBD1 oxygen sensor
10. OBD1 HFM
11. OBD1 main engine coolant hose (big hose that connects to the coolant pipe fitting on the timing cover, heater core, and radiator expansion tank)
12. OBD1 throttle boot
13. OBD1 throttle body (optional)
14. OBD1 Coil packs (I know that I don't need the OBD1 Coil packs but mine need replaced anyways)

[Asmod3us]

I've got the HFM, and maybe some of the smaller peices... PM me!

[BkE36]

i have the OBD1 valve cover and coil packs

[PitchblakToxic7]

PM's sent.

[hsander5]

I have the a HFM(3in.), the chip(a Turner Performance for stock engine, and the stock ECU Chip), and if by throttle boot you mean the elbow? I have that too.
All are off a 95 M3, don't need them any more because I upgraded to the 3.5 intake.
Here is my thread of the things I'm trying to sell.
email me if interested hsander5@utk.edu