WTB M/S50 complete

[Brian 89 325i]

Title says it, im looking for a complete M50 or S50 with wiring harness and ECU. Trans is optional. Preferr under 100k and Vanos. Thanks

Brian

[outkastaliens]

hey man, my friend has just what you are looking for. it is out of a 99 M3 and it has 30k miles. he also has the tranny attached if you want. If you are interested let me know.

[axcE36M3]

i have a s50 w/ a freshly rebuilt head using 3.2 parts with all new gaskets, schrick cams, 24's, euro hfm, intake, and conforti chip. mostly complete except no ac, dme, or harness.

head
block
intake manifold
3.2 exhaust manifolds
24lb injectors w/ fuel rail
bosch coil packs
ngk plugs
throttle body
schrick cams
oil pan
euro hfm
conforti 3.5" intake
conforti chip for cam setup
alternator
water pump (metal)
power steering pump

asking $4500 + shipping

-alex

[Brian 89 325i]

Thanks guys but im looking for an OBD I engine and it MUST have DME and harness. Itll just make the swap MUCH easier. Thanks anyway.

Keep em coming

Brian

[outkastaliens]

why MUST you have OBD I? the 3.2 is MUCH better if later on you can convert to OBD I. but he has EVERYTHING that would be needed. this is coming off a wrecked car. it isn't like he really needs it.

[FiKtIOn]

www.roadfly.org

[axcE36M3]

i can get you a harness and 413 dme for $750 or so. the one that came off this car originally was sold.

[axcE36M3]

it'd be too hard to make obd2 work properly due to all the emissions equipment and other sensors. an obd1 harness would be much much easier to do on a e30.