jmore1231
04-06-2011, 01:50 AM
Hi guys ive tried searching but no help, im having trouble with my recently purchased cluster for my car.
I bought a used one from 97 323i with 87000kms on the clock I was putting it in my 1992 325i with 190000kms on it. So will i had it out i did the sharpie mod and cleaned it alittle a may have slightly moved the rpm needle by accident just a touch it went to 1000rpm then back down no problems. So the problem im having is when i installed it everything works apart from the rpm needle part and by everything i mine everything like everything lights up where it should all the other gauges work fine. My question is there anyway i can fix or recalibrate it so it works or is it dead due to my error. I need help urgently Thanks Guys.
I bought a used one from 97 323i with 87000kms on the clock I was putting it in my 1992 325i with 190000kms on it. So will i had it out i did the sharpie mod and cleaned it alittle a may have slightly moved the rpm needle by accident just a touch it went to 1000rpm then back down no problems. So the problem im having is when i installed it everything works apart from the rpm needle part and by everything i mine everything like everything lights up where it should all the other gauges work fine. My question is there anyway i can fix or recalibrate it so it works or is it dead due to my error. I need help urgently Thanks Guys.