PDA

View Full Version : INPA 3.0.1 needed


blacktoy
03-07-2011, 05:48 AM
Hi Guys,

I would urgently need Inpa 3.0.1 because i want to read out an E34 1992 with an ADS interface from doitauto.de. Inpa 5.0.1 is not working on thah car (i was only able to connect to a few ECU's with Toolset32).

Many thank's in advance for your help.

BR from Austria
IcemanBHE
03-07-2011, 05:55 AM
INPA 5x is only an upgrade to an installed 3.x setup.

Dig around the forum here....there are links to downloads.
blacktoy
03-07-2011, 06:04 AM
Hi,

Ah ok because i have a Version where you first intall the "base Programs (Ediabas 6.47)" and after thath you install the data with Update.exe (only German).

Do you maybe have a Link for such a 2 step Inpa Version?
I've found a Inpa version in this Thread but i don't know if it is such a 2 step installation:

http://forums.bimmerforums.com/forum/showthread.php?t=1374483


Further do you maybe know if i will be able to read out the E34 with Inpa 3.01 (doitauto.de told me thath it should work)?

many thank's in advance

br
David Mc
03-07-2011, 08:08 AM
Use INPA as a password and follow the ENGLISH SETUP.pdf, the files you need are all in here http://www.4shared.com/dir/3U37f2mH/NCS.html .
blacktoy
03-07-2011, 08:12 AM
Thx !!!!

I've downloaded it but unfortunatley it is the 4.4.4. version of INPA
David Mc
03-07-2011, 02:57 PM
That is the loader version, it is INPA v3.01/EDIABAS v6.4.3.
blacktoy
03-07-2011, 04:18 PM
Yeah you are right -> i'm so stupid :))
Thank's a lot for this.

Has anyone tested here an ADS interface from Doitauto with inpa 3.01 on a E34 520i?
duanemarks
04-02-2013, 08:33 AM
Use INPA as a password and follow the ENGLISH SETUP.pdf, the files you need are all in here http://www.4shared.com/dir/3U37f2mH/NCS.html .

Hi Dave MC, could you please advise on a link to find INPA 3.01. The above link is broken.
I have a 1995 328i and would like to be able to access the coding.
Thanks in advance!
Quick99Si
04-20-2013, 12:35 AM
Try www.bimmerfest.com/forums/showthread.php?t=561237
mattsimis
06-02-2013, 08:59 AM
That thread only has much newer INPA versions.. like the previous posted I need 3.x for an E31, anyone got a source?
jamie123
06-03-2013, 01:19 AM
post21, http://forums.bimmerforums.com/forum/showthread.php?t=1915245&p=26229126#post26229126
cristimm
06-09-2015, 04:53 PM
That is the loader version, it is INPA v3.01/EDIABAS v6.4.3.

Any luck finding INPA v3.01?