NCS Expert fsw/psw from an E39

[maxic]

I'm looking for trace files from E39s, trying to figure out if mine has anything that's not proper. The closer your car is to what I have ('02 525iT 5-speed w/ ZSP), the happier I'll be to see your trace.

[rondo]

I'm looking for trace files from E39s, trying to figure out if mine has anything that's not proper. The closer your car is to what I have ('02 525iT 5-speed w/ ZSP), the happier I'll be to see your trace.Hi if you mean by proper that you want the car to be in factory default settings then you can recode the car to your VO using NCSEXPERT with the expertmode profile loaded.[no fsw/psw.man]..:D

[maxic]

I don't really want default settings in my car. It's a Touring with euro tails, which requires LCM to be coded with euro settings, while the rest of the car is coded for US. I'd very much appreciate a chance to do a line by line comparison that's so convenient with NCS Dummy.

[damci]

I have a 2003 E39 525d, what files do you need?

[maxic]

I'm afraid that would be too different, with diesel instead of gas and euro coding. Engine and country specific settings take up the most of the FSW/PSW trace.

[rondo]

I don't really want default settings in my car. It's a Touring with euro tails, which requires LCM to be coded with euro settings, while the rest of the car is coded for US. I'd very much appreciate a chance to do a line by line comparison that's so convenient with NCS Dummy.Hi seems like you could save a copy of your existing modified trace[s].recode to your module[s] to your VO then save a copy.Then recode your module[s]using the fsw/psw man profile with your first trc files.Then you have both sets of trc files for your exact vehicle [vo]...:D