Progman w/ OPS head and E39

[bmw4aaron]

I've been reading the forum over to figure this out but am not having much luck. I've got a orange OPS head with DIS V57 and and Progman V37 running via VMware. Dianosis with OPS head works fine, however when I try to change my CKM in Progman on my 98 540i it tells me I need to use EDIC/DK or ICOM/A. I've tried loading changes_v2.iso and end up with it not connecting to the head. The part I'm having trouble with is I'm using a factory head connected via ethernet cable and not USB diag cables. Do I need to set it up to look for the IP address of the head and what do I need to modify to do so? Thanks

[David Mc]

Like PROGMAN is telling you - E39 needs an EDIC head, I did not realise that you are using a genuine/clone OPS head, running different changes.iso programs with this head is a waste of time as it's function is hard-coded. Go and buy a cheap VAGCOM KKL interface, do the mods and with changes_v2.iso you should be good to go.

[bmw4aaron]

Like PROGMAN is telling you - E39 needs an EDIC head, I did not realise that you are using a genuine/clone OPS head, running different changes.iso programs with this head is a waste of time as it's function is hard-coded. Go and buy a cheap VAGCOM KKL interface, do the mods and with changes_v2.iso you should be good to go.


Good to know. Thanks for you help!