Log in

View Full Version : LCI controller and specdock installed.


BLooD30
02-26-2011, 06:51 AM
Installed a Specdock from www.specdock.com and a LCI controller today, I now have no haptic feedback :woot: on the controller, did you hear me! BMW a pre-LCI with no haptic feedback :censored:.
d4rkchocolate
02-27-2011, 12:49 PM
looks very impressive.. must feel good see the back of that magnetic haptic feedback
4711
02-27-2011, 01:01 PM
Sorry but is this so new.
You can Code the pre LCI Controllers to no haptic feedback for a long time.You must not buy a new Controller to have no haptic feedback.
My E91 12/06 withNav Prof i have coded to non haptic.Was no problem.
BLooD30
02-27-2011, 02:01 PM
Sorry but is this so new.
You can Code the pre LCI Controllers to no haptic feedback for a long time.You must not buy a new Controller to have no haptic feedback.
My E91 12/06 withNav Prof i have coded to non haptic.Was no problem.

So tell me how it is done then please?
4711
02-27-2011, 02:30 PM
So tell me how it is done then please?

ECU CAPPL

ZBE
high

New
ZBE
low_with_slopes
BLooD30
02-27-2011, 02:39 PM
ZBE low_with_slopes wont work with the E60 pre-LCI controller, I have tried it.
4711
02-27-2011, 02:41 PM
ECU CAPPL

ZBE
high

New
ZBE
low_with_slopes

If you can t write low_with_slopes or it did not work,you first have to change ZK of your VO to #0307 then write an empty fsw_psw.Man in Cappl.Then it will appear or you can change it from high to low_with_slopes.
BLooD30
02-27-2011, 02:44 PM
If you can t write low_with_slopes or it did not work,you first have to change ZK of your VO to #0307 then write an empty fsw_psw.Man in Cappl.Then it will appear or you can change it from high to low_with_slopes.

$307 safety lock for luggage compartment, how would that make the controller work with out haptic feedback?. Anyway I have it where I need so need to to worry.
4711
02-27-2011, 02:46 PM
Now i saw that you drive an E60,i have tested it on different E90 pre LCI,i have heard that some e60 had Problems with that.
But i don t kwow if they did it like i wrote
BLooD30
02-27-2011, 02:47 PM
Now i saw that you drive an E60,i have tested it on different E90 pre LCI,i have heard that some e60 had Problems with that.
But i don t kwow if they did it like i wrote

Yes mate I believe you.;)
4711
02-27-2011, 02:47 PM
$307 safety lock for luggage compartment, how would that make the controller work with out haptic feedback?. Anyway I have it where I need so need to to worry.

I have sayed #0307 Time criterium in english i think,its not a $


You don t write it on top you change it against old time criterium
BLooD30
02-27-2011, 02:49 PM
I have sayed #0307 Time criterium in english i think,its not a $

# is for the production date, so you changed the production date?. Yes that would work but its not a permanante solution.
4711
02-27-2011, 02:52 PM
# is for the production date, so you changed the production date?. Yes that would work but its not a permanante solution.
You can use it permanently ,when you write it back to old production time. After that you mustn t overwrite Cappl with new empty man.So everything is ok.
bobbyggx
12-06-2013, 04:47 AM
Hi guys, sorry for bumping the old thread but I wanted to ask you something.

I have retrofitted the NAV Pro to my car which only had the Business Nav. I coded the ZBE to LOW so I can use my old iDrive controller with the Prof Nav.
Unfortunately my shortcuts are not working (when you hold it to the left for few seconds it should access the CLIMATE, but it won't).

If I change the ZBE to low_with_slopes would I benefit from it? What is it doing actually?

Thanks!