BBS Style 5 break in … help!

[FLASHBACK 530i]

<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
I want to take the face out of barrel,
The first one I did it ok, with 10oz rubber hummer
The second rim I use 10 oz hummer and 16 oz rubber hummer, and finally 4 pound hummer but no luck so far

http://www4.0zz0.com/2011/01/21/22/729099711.jpg

Its look that the factory clear coat glow the face to barrel
I try and put this wheel in oven for 10 min @ 350 dident work
Any suggestion?

[RenegadeE36]

My 5's just popped out. Splitting my RSs I had to use a heat gun and a block of wood and a hammer. Try heat just on the outside of the barrel, then work your way around on the mesh near the bolts with a 2x4 and a hammer, just small taps, but lots of them.

[Kyle Anderson]

Drop it from a few feet onto hard packed dirt. Backside down, of course... the center will pop right out. You can throw it down with a little bit of force if it's really stubborn, but mine all separated first try. The key is that the ground must be hard packed; it doesn't work in grass. Obviously the ground is soft enough that it doesn't do damage to the wheel.

[swolcat]

spray wd-40 around the face from the back side (where the face meets the barrel) and let sit for 10-15 min
Then flip it over and put carboard or folded towel on the ground and whack it with a rubber mallet starting in the center then criss cross pattern
Sometimes the clearcoat is stubborn, ive had the faces just fall out with a light tap, and sometimes I need to do described method....

[626er540i]

spray wd-40 around the face from the back side (where the face meets the barrel) and let sit for 10-15 min
Then flip it over and put carboard or folded towel on the ground and whack it with a rubber mallet starting in the center then criss cross pattern
Sometimes the clearcoat is stubborn, ive had the faces just fall out with a light tap, and sometimes I need to do described method....

bro what kind of rims are those on your bimmer?

[swolcat]

bro what kind of rims are those on your bimmer?
in my sig..? fronts are 16x8 bbs rz469 rears are 17x8 bbs rc090