BQuicksilver
01-18-2011, 01:56 PM
I have a used set of 18" e92 replica wheels for sale. They are machined face wheels with black nonface surfaces to provide a nice contrast. These are very striking wheels! I will include the BMW logo center caps with the wheels.
Fit: These fit my 330i sport with no rubbing and gave it an excellent stance that fit 265 width tires.
Specs:18" (all four)
Hubcentric/OEM Center Bore (all four)
Fronts:
8.5" wide / ET35
Rears:
9.5" wide / ET38
Price: $300 + $100 shipping
Issues: 2 of them have some faint curb rash just on the very outer 2mm of the rim. You can't see it until you're a few feet away. One is about 2", and the other fainter one goes about 1/4 of the way around. There is a bit of oxidation near the center bore on a couple of these, though I'd imagine that could be taken off easily.
I did have a vibration in the car when I purchased it, and I still do (though better now). I have changed wheels (hence the sale), tires, rebalancing, alignment, LCAB's, etc. I did have these wheels sent out to be retrued (by Discount Tire/Saturn Wheel) and one refinished since it had significant curb rash, but the car still vibrated after putting the wheels back on. I then bought new wheels thinking maybe the trueing was done poorly, but it still vibrated, so I am doubtful the wheels were my source. I also put these wheels on a friend's 330ci and it drove perfectly, so again I am doubtful of there being an issue, but I feel obligated to disclose that I have dealt with an issue and these wheels have been retrued. FWIW the biggest improvement was after new LCAB's.
Pictures:
Mounted On the Car
http://img.photobucket.com/albums/v638/BQuicksilver/TH615_09.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel4.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel3.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel2.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel1.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWCenterCaps.jpg
Fit: These fit my 330i sport with no rubbing and gave it an excellent stance that fit 265 width tires.
Specs:18" (all four)
Hubcentric/OEM Center Bore (all four)
Fronts:
8.5" wide / ET35
Rears:
9.5" wide / ET38
Price: $300 + $100 shipping
Issues: 2 of them have some faint curb rash just on the very outer 2mm of the rim. You can't see it until you're a few feet away. One is about 2", and the other fainter one goes about 1/4 of the way around. There is a bit of oxidation near the center bore on a couple of these, though I'd imagine that could be taken off easily.
I did have a vibration in the car when I purchased it, and I still do (though better now). I have changed wheels (hence the sale), tires, rebalancing, alignment, LCAB's, etc. I did have these wheels sent out to be retrued (by Discount Tire/Saturn Wheel) and one refinished since it had significant curb rash, but the car still vibrated after putting the wheels back on. I then bought new wheels thinking maybe the trueing was done poorly, but it still vibrated, so I am doubtful the wheels were my source. I also put these wheels on a friend's 330ci and it drove perfectly, so again I am doubtful of there being an issue, but I feel obligated to disclose that I have dealt with an issue and these wheels have been retrued. FWIW the biggest improvement was after new LCAB's.
Pictures:
Mounted On the Car
http://img.photobucket.com/albums/v638/BQuicksilver/TH615_09.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel4.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel3.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel2.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWWheel1.jpg
http://img.photobucket.com/albums/v638/BQuicksilver/BMWCenterCaps.jpg