A 318ti and some 17x10 wheels! :ESM 002R Photoshoot inside:

[widebodyye30]

Hello,

Here is a set of our new ESM-002R wheels in 17x8.5 et 20 and 17x10 et 15. I ended up using a 205/45 and 225/45 rear tires and some fender roll and pull out back. The D2 coilovers at set at the lowest adjustments and at this height I barely clear the tires:)

I have alot of small upgrages that I will make to this car although it is my daily other than my truck:)

Also If you need more info on the wheels and specs please visit www.esmwheels.com (http://www.esmwheels.com)

Thanks for looking and have a great day,

http://i793.photobucket.com/albums/yy215/ultauto/318ti3.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti1.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti2.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti4.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti6.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti5.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti7.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318ti8.jpg

[gjVah]

Sweeeeettttt

[Eryan36]

I knew I'd see some shit like this if I wandered out of OT. :rolleyes

[gjVah]

I knew I'd see some shit like this if I wandered out of OT. :rolleyes
WTF are you doing here? :shifty

[nickzzzx1]

You should have used a 40 series tire but it still looks nice. I have a question about those wheels, can you polish the lips to get a full polish look?
In some pictures the lips look a little less polished/shiny than others.

[Grey Phox]

I'd like to see the 8.5's all around too on an E36. I think it would look good. That rear looks sick but at the same time it looks like there's too much difference between the front and back. I still love these wheels.

[widebodyye30]

You should have used a 40 series tire but it still looks nice. I have a question about those wheels, can you polish the lips to get a full polish look?
In some pictures the lips look a little less polished/shiny than others.
The lips on all the wheels are mirror finished with clear coat so they look super high quality;)


I'd like to see the 8.5's all around too on an E36. I think it would look good. That rear looks sick but at the same time it looks like there's too much difference between the front and back. I still love these wheels.

I will try to post up more pixs later in this next week;)

[Laxpunk2006]

That's a whole lot of tire.

[boomersooner523]

Looks good!

That being said...Ditch the banner :shifty

[DaHos]

:confused Scratches head and wonders why.........................still don't get the wide rim little tire thing.

[mtechnica]

Banner sucks
Wheels are sticking out too far, looks bean-y
Faux Euro plate behind the normal plate is gay

Besides that it looks fine

[widebodyye30]

That's a whole lot of tire.
:buttrock

Looks good!

That being said...Ditch the banner :shifty Thanks:) I like to rep my shop decals;)


:confused Scratches head and wonders why.........................still don't get the wide rim little tire thing. To make them clear the fenders..... its a hardcore EUROH THING:redspot:buttrock

[MBrown]

225 on a 10" rim?!?!?! I have 245's on 8.5" rims. Seriously what.

[Adrianl]

I have to say I'm a real fan of the 318ti (m62 speed swap it!)! I think this one looks good, I'd tint the windows, but I have a fishbowl thing and hate driving in a car with all clears makes me feel confined.

I love the fat rims little tyres as long as you've got the right rims for the job (ya do!), though I'm running 275's on my 10inch rims it's a little different on an e31.

Props to a good looking car!

[widebodyye30]

^ ya on my race car I have the same wheels but run 275 on the rears also:)

[NbAmTwE]

After I replace my subframe bushings and drivetrain (prbly 1/2 yr at this rate) I'll be ordering some 002s actually. You can't beat them for the price, unless I find a really good deal on ACS type I racing.
Keep up the good work! :thumbup:

[widebodyye30]

After I replace my subframe bushings and drivetrain (prbly 1/2 yr at this rate) I'll be ordering some 002s actually. You can't beat them for the price, unless I find a really good deal on ACS type I racing.
Keep up the good work! :thumbup:

Thanks:)

[///mfizzle]

Sweeeeeeet wheeels!

[widebodyye30]

Sweeeeeeet wheeels!

Thanks:)

UPDATE!

I didn't like the OEM mirrors so out with the old and in with the DTM CUP:) They work much better with the look of the car... Next is bodywork but I will hold off for a while:)

http://i793.photobucket.com/albums/yy215/ultauto/DSCN3396.jpg

[Bloodrunsdry]

paint match the mirrors, paint match the lower trim, keep the active bumper but get a sick lip and this ti is set ;)

[GTRSv]

please take off the window decal lol

[Boosted]

Nice wheels..

Now all you need is a huge-ass penny to stick out of the rear bumper! (not everyone will get that) :D

[lilcdkey]

Ew :shifty

[wippenberg]

Ti's will never loose their potential.
Tiny and Quick!!!

[sunbrn]

Now all you need is a huge-ass penny to stick out of the rear bumper! (not everyone will get that) :D
http://i692.photobucket.com/albums/vv284/daxon22/2009Apr-PennyRacer.jpg

[e36rok]

Fake wheels look so cheap...

[slocar]

Looks baller!

Wish I had money to snag a set of 002s; always liked those wheels. :)

[widebodyye30]

:)

[mateo m3]

look good

[FastrTHNu]

Anyone have these on an E36 Coupe?

[widebodyye30]

Anyone have these on an E36 Coupe?

E36 M3 with Staggered Gunmetal:)

http://i793.photobucket.com/albums/yy215/ultauto/Stanced20e3620036.jpg
http://i793.photobucket.com/albums/yy215/ultauto/Stanced20e3620042.jpg
http://i793.photobucket.com/albums/yy215/ultauto/Stanced20e3620050.jpg
http://i793.photobucket.com/albums/yy215/ultauto/Stanced20e3620055.jpg

E36 M3 gunmetal staggered:)

http://i793.photobucket.com/albums/yy215/ultauto/e36m3_ESM1.jpg
http://i793.photobucket.com/albums/yy215/ultauto/e36m3_ESM2.jpg
http://i793.photobucket.com/albums/yy215/ultauto/e36m3_ESM3.jpg
http://i793.photobucket.com/albums/yy215/ultauto/e36m3_ESM5.jpg
http://i793.photobucket.com/albums/yy215/ultauto/e36m3_ESM5.jpg
http://i793.photobucket.com/albums/yy215/ultauto/IMG_6668.jpg

[GWerks]

Nice!

Looks good!

[Geneski]

That rear looks sick!

[Bigbores Bro]

I like em both :)

[widebodyye30]

I like em both :)

:)

[mdschurtz]

paint match the mirrors, paint match the lower trim, keep the active bumper but get a sick lip and this ti is set ;)

+100000000 ti's look so much better matched

[widebodyye30]

+100000000 ti's look so much better matched

I have something in the Werkz for the car;)

[whitebeast]

Real 2/3 piece or nah?

[yoshioka90]

Real 2/3 piece or nah?

+1

how much do they weigh?

[widebodyye30]

wheels are 1 piece cast and right about 22lbs;)

[widebodyye30]

Here is an update with the car:) Installed front and rear mason Aluminum bars. Mason did not have a 318ti rear bar so we design the prototype on my car;) I also updated the lights will post pixs soon!

Please visit the link for all Mason E36 products:http://www.dtmfiberwerkz.com/index.php?cPath=22_34_88_779

http://i793.photobucket.com/albums/yy215/ultauto/318tifrontbar.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318tirearbar.jpg
http://i793.photobucket.com/albums/yy215/ultauto/318tisidebar.jpg

[3xxtiMZK2]

how much for the rear strut brace?

pm me

[widebodyye30]

how much for the rear strut brace?

pm me

Pm sent:) All Mason bars will be listed on the site soon and I will make a thread in the Vendor section;)

[nineball12]

+100000000 ti's look so much better matched

then it would look just like my car... :shifty

[adamnur]

Those fenders...look butchered. Wheels look nice though, but sort of expensive for a 1 piece cast.

[JE BMW]

rims look nice.. but id rather get some real bbs style 5s for 450 or less and refinish them,
250 and 350 for 1 wheel is way too much.

[PhoenixRX7]

needs a widebody in the rear and some proper meat on those 10"...Love the mesh style though...the front wheels/tires/tuck is clean. That butt though....needs more.

[Mauritius36]

love the wheels themselves. tire heights look off. I understand the look youre going for, but i think 8.5s all around would look better on all the cars pictured- the lips are plenty big and I think you could flush them out just as well without having to go with such a skinny tire. personal preference though

[Redy 318Ti]

nice stance, some paint on the mirrors and bottom panels and its money! I noticed that you offer a carbon hatch for the Ti which leads me too asking, do you think you might produce fiberglass or a carbon fiber/plastic doors soon? I've been extensively searching for fiberglass doors for my 318ti to reduce some weight, no one makes them yet.