Toutinh rear wiper length

[GGray]

Yes an odd question..


I put a wiper on my touring FINALLY since I got the wiper and third tail light to work last week end... I bought a 13inch Bosch wiper and used some errr engineering with JB weld to attach it to the arm since the actual attachment point was snapped off.. Looks like stock but its a bit shortish looking.

Can anyone measure there blade and let me know :D

ONE more electircal to hit then its on to the body for some paint!

[LouieD]

17"

[attack eagle]

replace the entire arm... I had to, mine was also broken when I bought the car.

not super expensive either.

[GGray]

17"

I'll have to check. I think 17 may be too long for the et up I have on mine..


I did not feel like spending 65 dollars for the arm so I made the one i have work :D I'll post a picture of it tongiht when I get home

[M Quick]

17.7" is the correct size AFAIK. All my tourings has had this size wiperblade and they fit spot on, bigger than that and it will hit the hatch wing.

I actually have one rear wiperblade sitting infront of me and it's 450mm (45cm / 17.7"), why i have it sitting here is because i snapped mine the other day and i took one off of one of my tourings to put on my DD.

A new arm(not the wiperblade) is 50 bucks at the dealer or any other auto parts store, they should have it too.

[GGray]

17.7" is the correct size AFAIK. All my tourings has had this size wiperblade and they fit spot on, bigger than that and it will hit the hatch wing.

I actually have one rear wiperblade sitting infront of me and it's 450mm (45cm / 17.7"), why i have it sitting here is because i snapped mine the other day and i took one off of one of my tourings to put on my DD.

A new arm(not the wiperblade) is 50 bucks at the dealer or any other auto parts store, they should have it too.

They might have it there at autoparts stores. Here its a dealer itam my cost is 65.00

I'll post pictures of it. turned out great cost.. $5.99