HARD (black) Power Flex subframe bushings, I am getting some made,

[GGray]

ORDER DEADLINE IS DECEMBER 3RD!

Since I am going to pull the subfrae out of my touring in a few months to put bushings in I am going to get some Black Powerflex subframe bushings made! The black is the High Durometer material, yellow basically slightly above factory, purple is harder, black is hardest. I have some plans for the touring and want the black compound.

I figured while I was having them made I woudl see if anyone else was intrested.

It takes about 8-12 weeks to produce custom bushings. If you wanta set you will have to pre pay for the and they are non refundable items.

If you are intrested email me at work with the subject line as follows.

BF E34 PFbushings.

gary@bimmerworld.com

[DrPatTCakes]

http://www.threadbombing.com/data/media/2/342.gif

[GGray]

http://www.threadbombing.com/data/media/2/342.gif

I asume that means good :D

[GGray]

http://www.threadbombing.com/data/media/2/342.gif

I asume that means good :D

[jhennig]

price?

[DrPatTCakes]

You need to e mail him. I believe rules prevent him from listing a price.

[K Fox]

Here's a question that hopefully won't break the rules - what's the timeframe on this? More importantly, what's the latest payment needed by? Interested, but cautious...

Fox

[GGray]

If you look up the rear mount on our site www.bimmerworld.com they will be the same price plus shipping. No price deals just the ablitiy to get something that is not a production item. 8-12 weeks since they are custom items. Payment will be needed up front since it is a custom non stocked item.

Payment will be though our store, with a card. I will have to enter the orders manually since it is a special item.

I am going to edit the intital post with an order deadline of december 3rd. I'm not waiting around I want to have all my bushings ready to go in the car at the same time.

[EuroPartConnect]

How will these perform compared to purple powerflex bushings? I am intrested but i dont want to deal with squeaking and such that are associated with these kind of bushings, harsher ride i am not as worried about.

[GGray]

How will these perform compared to purple powerflex bushings? I am intrested but i dont want to deal with squeaking and such that are associated with these kind of bushings, harsher ride i am not as worried about.

I have never had a subframe bushingd make noise. control arm and sway bar bushings do sometimes but can be quited down with teflon based grease such as Tri Flow (available from a local bike shop, may have to order it)

Black is the hardest version Powerflex makes. Ive used black subframe bushings in E36's, and E46's no noise from them.