325is exhaust fit on 318is?

[318bud]

yea the question is ^
will 1992 325is exhaust fit on a 1992 318is
im pretty sure it wll i just wanted to doublecheck
thanks fellow bimmers

[kosta]

318 has one pipe, 325 has two. It will not bolt on unless you cut it and weld it

[Wout CSL]

No way a 325 will fit an 318is!

The 325i header are twice 3 to 1, section 1 is 2 pipes to 1 and back to 2 with 2 cats and 2 small mufflers, section 2 is 2 pipes in the muffler and two endpipes. The 318IS header is a 4 in 2, section 1 is 2 pipes to 1 with 1 cat, section 2 is 1 pipe with first 1 small muffler and then 1 big muffler and endpipe.

[catch22]

The above posts are correct, plus, rear OEM bumper on 4 bangers don't have enough room for 2 pipes.

[kosta]

The above posts are correct, plus, rear OEM bumper on 4 bangers don't have enough room for 2 pipes.

that's not a biggee, you can swap the valence if you go aftermarket dual tip 318 exhaust

[slocar]

The above posts are correct, plus, rear OEM bumper on 4 bangers don't have enough room for 2 pipes.

I just cut mine. :dunno

http://a.imageshack.us/img121/2696/ansa1.jpg

[catch22]

that's not a biggee, you can swap the valence if you go aftermarket dual tip 318 exhaust


I just cut mine. :dunno

QFT, I've forgotten about many E36 workarounds and interchangeable body pieces already.

[318bud]

yea im about to get a dual tipped. just planned on cutting mine.like slocar
but it fits a 318is no worries
thanks for the info tho i did not know this

[orangehatter]

I'm pretty sure a 323is/ic exhaust will bolt up, seeing as it's a single pipe going into a dual muffler.