Where to buy oil pressure gauge

[Marv17]

Hey, does anyone know a good source to buy a oil pressure gauge, sender, and accessories needed to install? I have a oil cap on order where i can install an oil pressure line but don't know where to source the needed parts.
Thanks for the help.

[ChuckDizzle]

Hey, does anyone know a good source to buy a oil pressure gauge, sender, and accessories needed to install? I have a oil cap on order where i can install an oil pressure line but don't know where to source the needed parts.
Thanks for the help.

leatherz.com

[PHARMDVIPER]

egauges.com

its where I got my stuff....or if you want to shell out more dough check out SPA gauges..they have them at bimmerworld

[das borgen]

\ebay (i m a fan of VDO classic gauges)

jeg's

summit racing

bmpdesign

[jmo69]

I think this is the place I got mine, I know it's the gauge. I also got my oil pressure gauge there too. They come with the senders and mounts, you just need more wire. The amber is a good match to the factory dash.
http://cgi.ebay.com/ebaymotors/Water-Temperature-Gauge-Electrical-Amber-White-52mm-_W0QQcmdZViewItemQQhashZitem483b9a3082QQitemZ31023 7606018QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_1739wt_888
Here's my install thread, I used the oil line bolt as a source.
http://forums.bimmerforums.com/forum/showthread.php?t=1205248

[Marv17]

I think this is the place I got mine, I know it's the gauge. I also got my oil pressure gauge there too. They come with the senders and mounts, you just need more wire. The amber is a good match to the factory dash.
http://cgi.ebay.com/ebaymotors/Water-Temperature-Gauge-Electrical-Amber-White-52mm-_W0QQcmdZViewItemQQhashZitem483b9a3082QQitemZ31023 7606018QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_1739wt_888 (http://rover.ebay.com/rover/1/711-53200-19255-0/1?campid=5335818596&toolid=10001&mpre=http%3A%2F%2Fcgi.ebay.com%2Febaymotors%2FWate r-Temperature-Gauge-Electrical-Amber-White-52mm-_W0QQcmdZViewItemQQhashZitem483b9a3082QQitemZ31023 7606018QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries%23ht_1739wt_888)
Here's my install thread, I used the oil line bolt as a source.
http://forums.bimmerforums.com/forum/showthread.php?t=1205248


so if i bought this what else would i need to buy? or is everything already supplied by purchasing this gauge?

how would i find a stainless steel line as well?

[jmo69]

so if i bought this what else would i need to buy? or is everything already supplied by purchasing this gauge?

how would i find a stainless steel line as well?
These are electric gauges, no line needed. Just a gauge, sender and wire.

[bauh]

the dealer..kidding try ebay

[Marv17]

Eh. just went to a local dealer instead. Bought a 80 psi gauge and a 80 psi sender, stainless steal break line. Looking good now. I'll post up pictures soon.

[PHARMDVIPER]

what kind of gauges does the dealer have?

[Marv17]

i meant a local store that sells VDO gauges. my bad in the wording. But we do have a "stealer" that sells gauges here, in the offroad section.