Tappits
07-29-2010, 01:47 PM
We have replaced everything on the suspension (bearings, bushes, arb links and so on) and fitted a full Koni suspension kit that was sopost to lower it 35mm on the front and 25mm on the back. but we have fitted everything and its sitting about 2-3 inch to high on the back, the front is fine
We have tried everything to lower the back down agene, including fitting the springs that came with the car (m sport ones) but its still sitting very high and is rubbing on the back arches when driving hard round bends. Because of the height issue the camber on the back is also very wrong which is probably why its hitting the arches as it did not do before we changed everything.
Any and all help will be gratefully recived as we are at wits end with it now and the only good suggestions we have had so far from m8's involves cutting things. :(
We have tried everything to lower the back down agene, including fitting the springs that came with the car (m sport ones) but its still sitting very high and is rubbing on the back arches when driving hard round bends. Because of the height issue the camber on the back is also very wrong which is probably why its hitting the arches as it did not do before we changed everything.
Any and all help will be gratefully recived as we are at wits end with it now and the only good suggestions we have had so far from m8's involves cutting things. :(