clutch help

[e30ct]

I just replaced my clutch acouple days ago and i went to change my slave cylinder today. Now when I press the clutch it goes straight to the ground and stays there. I bleed the slave cylinder when it was out of the car by pushing the rod in while the bleeder screw was out then releasing the rod while the bleeder screw was in multiple times and still no pedal. Is it the master cylinder? or did i not bleed it enough?

[TGreene]

Is the system leaking any fluid?

If not, either did not bleed (most likely), or a weak return spring in the master cylinder. I do not know if a weak spring in the master is enough to keep the pedal on the floor or not.

Check for leaks and bleed it again.