where do i find bbs center cap stickers for style 5 centercaps

[unit12v]

like the title says i am redoing a set of 2 peice 17in style5 wheels and im loooking for the red center cap logo with the gold bbs writing to go in place of the bmw logo. where can i find these things? thanks :help

[Jim@tirerack]

They make those caps for the forged wheels. If you get me a wheel part number I can check to see if I have one to work.

[unit12v]

They make those caps for the forged wheels. If you get me a wheel part number I can check to see if I have one to work.


this is what im looking for i believe in 70mm
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs640.snc3/32125_111007735611530_100001069115938_66849_478325 _n.jpg

want to fit them right where the bmw logo is insight the center cap in these so i can finish them any help would be awesome
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29225_111004105611893_100001069115938_66844_144586 4_n.jpg

[Jim@tirerack]

I could not pull up the link. Just send it to jim@tirerack.com

[MMMPR3S]

http://www.sfxperformance.com/docs/BBS-Wheel-Hardware-Guide.pdf

Find your part number there...

http://www.purems.com/products/product.php?II=77

^ you can buy them there.

[unit12v]

http://www.sfxperformance.com/docs/BBS-Wheel-Hardware-Guide.pdf

Find your part number there...

http://www.purems.com/products/product.php?II=77

^ you can buy them there.


Thank you very much

[HFe36]

70 mm will fit the style5? does the backspacing matter?

[Kyle Anderson]

/\/\

The hole that the BMW logo is recessed into is 72.5mm, so yes, 70mm is the correct size logo.

[Jim@tirerack]

But if you are wanting the cap and not just the logo you will need a specific cap for your wheel. BBS has a complete book of center caps and they are all different.

[ojE39]

noob question but how do u actually remove the bmw logocap from the bigger hubcap?

[99GREENM3]

Look on this site, you will see different style caps at the bottom, Pick a 70mm cap with the color you want. When you get the caps heat them up a little with a Hair dryer then you can seperate the bbs emblem from the black piece the emblem will be flat at this point, Take the emblem and glue into the center of your style 5 caps remove the bmw sticker in the center first.
http://purems.com/products/product.php/II=77


Then it should look like this.