se93
05-28-2010, 10:07 PM
Hi guys:
After successfully finally getting my GT1/EasyDIS/INPA setup up and working perfectly not long ago, my laptop got a nasty worm virus and very sadly had to be reformatted. I was very eager to get my system up and running and had everything ready for a clean and fairly easy installation as i had already been through this. Well, not exactly.
I am stuck and have been stuck for the last few days trying to get the GT1v44 program successfully installed, but nothing close. I have deactivated the CD, unmounted the disk, restarted, remounted, installed and still cannot get the long awaited "your installation has been successful message. The error i get is: "The DIS installation has been completed with faults fault number -250.
I have a new and fresh copy of Windows XP and VMware 6.0. I tried two different version of Daemon Tools (one of which David sent me) and get the same results. I have used the optical drive of my laptop to install theGT1v44 DVD and also used an external DVD drive to no avail. The DVD disc itself is in perfect shape with no scratches or marks whatsoever. I have not made a new copy to see what happens and probably will as there isn't much more to try. What is going on? Is there a solution to this?
Everything else procedurwise goes perfect with the EasyDIS software installation and everything else is fine.
Some imput will be appreciated as this is really driving me nuts.
Regards,
Mark
After successfully finally getting my GT1/EasyDIS/INPA setup up and working perfectly not long ago, my laptop got a nasty worm virus and very sadly had to be reformatted. I was very eager to get my system up and running and had everything ready for a clean and fairly easy installation as i had already been through this. Well, not exactly.
I am stuck and have been stuck for the last few days trying to get the GT1v44 program successfully installed, but nothing close. I have deactivated the CD, unmounted the disk, restarted, remounted, installed and still cannot get the long awaited "your installation has been successful message. The error i get is: "The DIS installation has been completed with faults fault number -250.
I have a new and fresh copy of Windows XP and VMware 6.0. I tried two different version of Daemon Tools (one of which David sent me) and get the same results. I have used the optical drive of my laptop to install theGT1v44 DVD and also used an external DVD drive to no avail. The DVD disc itself is in perfect shape with no scratches or marks whatsoever. I have not made a new copy to see what happens and probably will as there isn't much more to try. What is going on? Is there a solution to this?
Everything else procedurwise goes perfect with the EasyDIS software installation and everything else is fine.
Some imput will be appreciated as this is really driving me nuts.
Regards,
Mark