Inner door panel help...

[Humdot]

Hey guys, so today I removed my door panels to glue the plastic trays on so they would stop making noise, but after I did that I noticed that 3 of the white plug things on the driver side door panel were broken and wouldn't latch on into their spots. I couldn't see a way of getting them out without breaking off the plastic bits they're attached to. Is there anywhere I can buy the whole tray/black plastic bits including the white connectors and re-glue them?

[328istothebone]

They'll come out, just need to buy the clips. It's easier to take them out if you lean them to one side, you'll see they have a flap type spot where they split, from there use a 90 degree little pry stick and then twist them out. After you do a couple it'll get easy but the first one is always the hardest. Just be sure not to break the trays.

[coconutmnky]

25 cents each on pelican parts

[Humdot]

25 cents each on pelican parts

25 cents with $30 shipping cost to Australia :(

Might have to Ebay it, even then It'll cost $6 inc postage for 6 clips...

[revmoo]

Dealers carry those clips. They are pretty easy to remove though once you get the hang of it.

[Mauritius36]

if they are broken already grab them with a pliers, lift up, angle the pliers slightly and twist. they have a slight opening which youll want to get to catch the lip of the door panel and it will basically unscew from there.

[etwuan]

go on ebay i bought a pack of like 50 clips for 10 bucks