are this offset to low for a 95 m3

[mateo m3]

guys i found a great deal on some wheels on craiglist, the size are 18x8.5 et20 and 18x10 et25 just need to know if this offset are to low, and if i can make this work with fender rolling? please help thanks in advance guys!!!!!!!!!

[sirius815]

Lots of fender rolling in the front - and LOTS of pulling and rolling in the back + stretch both front and rear. Risk of paint cracking is very high!

[mateo m3]

the paint is not a problem as the car will be repainted, i was just wondering if anyone with a e36 had this size wheels with the same spec on the m3, or even if any pictures

[sirius815]

If paint is not a problem, do it!! What wheels are they? Pics or link?

[mateo m3]

they are on a 5 series not sure of the brand i think they are nzo pino R. the price is right, i just don't know how it will fit. you see i in the middle of swaping an ls2 engine on my m3 and i know i need some wide wheels on the back for good traction.

[Mystikal]

I know of a certain E36 with 18x10 +20 rear, but it took serious fender flaring. You should have an experienced body shop handy.

The front will work without any mods, if you run stretched tires (215/35 or 225/35).