DSC light ON

[champaign777]

I need erase my ABS errors ( DSC light is ON ) and calibrate my steering angel sensor .
After last alignment this light pop up ... dealer said it need clean ABS errors and steering angel sensor calibration

any link to this matter will be highly appreciated

[IcemanBHE]

When you get your DIS working, you can clear the codes and DIS will also walk you thru the proceedure to reset your Steering Angle Sensor.

I know this....as I have done this.

[champaign777]

Thanks !

should i start from diagnosis or coding ?

[IcemanBHE]

Clearing and resets are part of diagnosis.

Coding is only for changing modules or car/key memory.

[champaign777]

ok got you

[champaign777]

ok

I like DIS ... very easy to use ...
i just cleaned all steering angel sensor errors but still DSC light is ON and when i did test again after switch off / on one DSC error is still there

i went thr. proceedure to reset my Steering Angle Sensor but in the end DIS said i need to do recoding


This is my problem :
-----------------------------------
61 Steering angle sensor identification
the fault is currently currently present

This is how DIS said i need to resolve
-----------------------------------------------
encoging / ZCA - FA coding / model seris / new coding

any help ? is it INPA or still DIS will do encoding ?

[champaign777]

INPA said :

Steering angle adjustment nessesary

[Snowcatxx87]

champaign, you need to understand how all of this works before you dive into coding.

Read up some more, understand what each software does...

[champaign777]

this what i do on the fly - study during coding - i am a programmer :) one language more, one less , all the same crap
INPA is like a COBOL

--------------------------------
Last update :

finally I resolved DSC issue today

INPA + DIS + calibration did this work :)

first i cleaned DIS errors in INPA and went again throught DIS :

function selection -> chassis -> DIS 57 -> steering angel -> recalibration -> steering angle ( should be 0 degree ) - > calibration -> switch off /on -> DONE


no DSC light anymore , switch on/off works

Vuala :redspot