87 635csi manual trans parting out

[pzvt]

Let me know what you need.

[DGM635csi]

What colors are the interior?

[dmac156]

Pictures?

[Rallim]

How much would you want for the 5 speed, considering it works?

[kayoticwolf]

is it does it have LSD and is it compatable with an 82 euro?

[stoner]

I need the part that realOEM refers to as Moulding/Radio Cut Out. On the pic below it is part #1
Regards,

Dwight

[av8r4aa]

Working radio with the code I need

[Salem635CSI]

Are the driver and passenger seats powered?..do you have any pictures of them?....I recently acquired an '85 shark car and to my disappointment some one botched in some racing seats in the front. I would really like to return the car to its former factory options. How much would you be looking to get for them?

[pzvt]

Interior is beige
seats are not available
I'll check on the radio
5speed works not sure if 260 or 265 I'll check
what is LSD?

[pzvt]

Hard to see what item 1 is but if it is the plastic piece that holds the radio and computer I have it
Radio works - code is available online
The color is like 0034 tabakbraun
from: http://www.claasi.de/html/fa110100.html
Transmission is getrag 280/5 - pm me with offer if interested

[av8r4aa]

About the radio,
I have one that another man sold me WITHOUT the code.
I tried to look up the number at the BMW dealer, no workie...

It is no good because I could never get the code to make it work.

IF you have the code to make it work then I will buy it.

[Seeker]

sure that trans. isnt a 260/6?

easy way to tell is if it has "fins" on the bottom of it


http://www.exx.se/maintenance/gearbox_oil_change/4673.jpg

[Bentsdl]

Yeah, if it really is a 280/5 it should have the fins AND have a small intermediate section. See my attachment for what I mean. If it has fins but no third section it should be a 260/6. Odds are it's not a 280/5, as they are very rare. If it is: $$

If it has a removable bell-housing it's probably a 265/6 or 5.

[Seeker]

I believe this is a 280/5

http://image.nettix.fi/extra/partimg/890901_891000/890938_b_467bb13918643bd1.jpg


and to my surprise, it also has fins like the 260/6.. but you can clearly see it has that extra section in the middle of it.


And yea.. it would be VERY rare indeed.. especially if found in a '87 635.. plus, wouldnt it have to use a different driveshaft than what would be used with a 260/6?

[Bentsdl]

Yes, that should be a 280/5 seeker. The m5, m6 and m635 all use a drive-shaft that is not used in the non M cars. That should be because of the transmission (almost all M's used the 280/5 I believe) as the diff's are the same for M and non-M(dimension wise). But I wouldn't be surprised if it were possible to use a 265/5/6 or 260 drive shaft with a 280/5. Maybe with the use of a thicker or thinner guibo.

[alpinacsi]

Looking for 3.64 diff as was found in the m30b35 powered cars. Not sure what yours has in it but I might be able to tell from the last 7 digits of the VIN.

[M.Rad.]

Hi, I need the glove box latch mechanism. Please p.m. me.

Regards,
M.R.

[av8r4aa]

Is the hydraulic brake booster available?

[pzvt]

Hydraulic brake booster is available
latch for glove box is also
tranny does not have extra section but fins - If the info above is right then it is a 260/6?
last 7 on vin said it was 280/5 (0607798)
I'll try to get the code today and test


Hi, I need the glove box latch mechanism. Please p.m. me.

Regards,
M.R.


How do you pm on this board???

[carsnplanes]

Hydraulic brake booster is available
latch for glove box is also
tranny does not have extra section but fins - If the info above is right then it is a 260/6?
last 7 on vin said it was 280/5 (0607798)
I'll try to get the code today and test




How do you pm on this board???

If you click on the poster's forum name(handle) it will bring you to a menu and you can see "send an email message".
Upper right hand corner of the web page (Welcome area) under the logged in area, is the PM Private Messages link where you can track your messages.

[pzvt]

Thanks!!


If you click on the poster's forum name(handle) it will bring you to a menu and you can see "send an email message".
Upper right hand corner of the web page (Welcome area) under the logged in area, is the PM Private Messages link where you can track your messages.


I can't do either - checked settings and do not see where this is set to allow private messaging?

[M.Rad.]

E-mail me at rad.horses@yahoo.com, if p.m. isn't working. I won't be checking e-mail 'til later this evening.

Regards,
M.R.

[carsnplanes]

Thanks!!




I can't do either - checked settings and do not see where this is set to allow private messaging?


Are you signed up as a user and and logged in? Perhaps you have to have a certain amount of posts before you can use the PM feature. Not sure. You should be able to just click over each posters avatar name and see a drop down menu and see other areas like their profile of each poster too.

[dm635]

It should have rear AC being an 87. I need a heat shield that's bolted to the passenger side strut tower. It's a cover for the AC lines & blocks heat from the engine. 4 or 5 nuts hold it in place. Thanks

[alpinacsi]

According to the VIN it is a 7/86 build which does not have the diff I am looking for but is listed as having a 260/6 trans.

[pzvt]

Sorry - heat shield is gone - someone else wanted that
Thanks for the tranny clarification!

[1988Terp]

Looking for both rear tail light lenses... are they in good shape? If so, I'll take 'em.