WTB 99 M3 Cylinder Head (S52/M52) in Bay Area

[NomanA]

Looking for pressure tested/no cracks cylinder head. Complete cylinder head (with or without cams) would be better, but I'd like to know about any bare ones as well. I'd love to get something here in Bay Area, otherwise will get it shipped.

Please let me know. Thanks.

[Boris1111]

Email sent, can't PM you

[Euro S50]

im getting one (S52) this week, these things go for about $1500, throw me a better offer, i have a head with 100k. Im in SACRAMENTO

[wanganstyle]

check your email

I have one local that I will be dropping off at my machine shop (Stirtz machine in Oakland) to get cleaned/pressure tested this coming week. Could have them rebuild it for you as well if you wanted - my S52 head is complete with full valvetrain, perfect valves - only ran with stock DME, great compression. Box of brand new OEM valve guide seals included as well-

http://lh3.ggpht.com/_Zomj3eOxl94/S4lvPH2lUkI/AAAAAAAAFOg/tz4y2lRblTY/s512/IMG_0214.jpg

Head is now on bench-

nonvanos plate test fitted on bench because I was pondering building this head up with high lift cams and vanos delete, I can sell it to you if you need a vanos delete setup-

http://lh6.ggpht.com/_Zomj3eOxl94/S4lvP33pTXI/AAAAAAAAFOo/gInJc83Ym9s/s640/IMG_0217.JPG

[Farvardeen]

got a rebuilt one for $750 shipped, I have reciepts for the job done at machine shop. pretty much complete except for the cams and valve cover

[p86bmw]

I have a complete m52 head with 91k miles for sale just came from the machine shop. all good to go. Will ship it to you for $550