cowtownbimmer
02-24-2010, 12:29 PM
hey all,
sorry if this has been covered already. I did a quick search and couldn't come up with anything.
well the short story is my little cousin doesn't really get the concept of "drive to the conditions" so on icy roads you don't want to take a corner at 60 kph.
so now rather than pay MINI close to $5000 CAD to fix the suspension and steering I thought I'd help her out and do it for her.
I'm pretty familiar with suspension and steering components so I assume it shouldn't be too difficult. but I've never worked on a mini before. do I even need a jack or can I prop it up on a couple books.. hahaha j/k
well I've tried finding parts from several site I normally buy from for my e39. but no luck.
can anyone direct me to a site that has a good amount of mini parts?
this is what I'm looking for.
BM32-10-6-778-547 L-TIE ROD
BM32-10-6-778-560 RUBBER BOOT
BM37-10-6-789-678 HEX NUT
BM31-12-6-772-301 L-WISHBONE
BM07-12-9-906-047 NUT M14X1,5-8-ZNS3
BM31-10-6-774-714 NUT
BM31-12-6-772-303 L-BALL JOINT
thanks for reading.
sorry if this has been covered already. I did a quick search and couldn't come up with anything.
well the short story is my little cousin doesn't really get the concept of "drive to the conditions" so on icy roads you don't want to take a corner at 60 kph.
so now rather than pay MINI close to $5000 CAD to fix the suspension and steering I thought I'd help her out and do it for her.
I'm pretty familiar with suspension and steering components so I assume it shouldn't be too difficult. but I've never worked on a mini before. do I even need a jack or can I prop it up on a couple books.. hahaha j/k
well I've tried finding parts from several site I normally buy from for my e39. but no luck.
can anyone direct me to a site that has a good amount of mini parts?
this is what I'm looking for.
BM32-10-6-778-547 L-TIE ROD
BM32-10-6-778-560 RUBBER BOOT
BM37-10-6-789-678 HEX NUT
BM31-12-6-772-301 L-WISHBONE
BM07-12-9-906-047 NUT M14X1,5-8-ZNS3
BM31-10-6-774-714 NUT
BM31-12-6-772-303 L-BALL JOINT
thanks for reading.